What to do if the injection molding machine is not working correctly

When working with various polymer materials, you cannot do without an injection molding machine. This equipment allows you to quickly produce a wide variety of products: souvenirs, parts, accessories, etc. Purchase a suitable injection molding machine https://gemini-promplast. ru/goryzontalnye_tpa you can contact a specialized company. Sometimes the equipment begins to function incorrectly. What should you do in this case?

Typical faults and their elimination

Sometimes the user is faced with the fact that a product made of polymer material is not completely molded. In this case, you need to check whether the nozzle and the central sprue are aligned. This may not be the case, resulting in leakage of the polymer material. The problem can be solved by adjusting the position of the nozzle and sprue. The reason may also be that the injection time or speed of the polymer material is too short. In addition, the ventilation cavity of the mold should be checked. It may be clogged and needs cleaning.

Another typical problem is that it is difficult to remove the finished product from the mold. This may indicate that the polymer material is heated to too high a temperature. This figure needs to be reduced. It is also worth inspecting the mold. It may not be lubricated enough. In addition, you should try to increase the cooling time of the finished product.

Sometimes the user experiences cracks in the product. This may indicate incorrect adjustment of the injection molding machine ejector. It should be configured. The reason may also be poor mold design. In this case, all that remains is to design and manufacture it again.